Container House: Moved In - Angela's Blog

Contruction was not finished, but we moved in December 11, 2010.  I noticed that date is 12.11.10.  I was curious and just looked back to see if we started on 11.10.09, but it was a few days earlier than that.  I noticed on Curt's container blog that he got too busy to post to the blog.  The same has happened to me.  Nevertheless, we are in and find the house comfortable.  I am finishing details as I go.  I have been working inside due to the weather and wanting to get moved out of the mobile home where I had been living.  The outside still looks like a construction site. 

Breakfast Bar and Lights

In a rush to make decisions in the kitchen, we moved the bar.  After the fact, we realized the light placements were no longer over the bar.  We built these fixtures from salvaged copper tubing and ceiling fan lamp holders.  They are missing the globes.
?

?

- Hello, My amazing Build Shipping Container House blog readers. Nice to meet You again, today. Here, now. In this article titled, , you might find interesting information about what You looking for. Hopefully, the content from my Container Homes article will bring you many advantages both in work and in life. Enjoy Your readings. ^_^

Title : Container House: Moved In - Angela's Blog
URL Link : Container House: Moved In - Angela's Blog

Contruction was not finished, but we moved in December 11, 2010.  I noticed that date is 12.11.10.  I was curious and just looked back to see if we started on 11.10.09, but it was a few days earlier than that.  I noticed on Curt's container blog that he got too busy to post to the blog.  The same has happened to me.  Nevertheless, we are in and find the house comfortable.  I am finishing details as I go.  I have been working inside due to the weather and wanting to get moved out of the mobile home where I had been living.  The outside still looks like a construction site. 

Breakfast Bar and Lights

In a rush to make decisions in the kitchen, we moved the bar.  After the fact, we realized the light placements were no longer over the bar.  We built these fixtures from salvaged copper tubing and ceiling fan lamp holders.  They are missing the globes.
?

?

Read More

Container House: Coming To The End - Angela's Blog

11/25/10 Thanksgiving Day!  While not much has changed as far as a picture could show, lots of work has been going on.  The HVAC unit has been installed.  Insulation has been blown in the attic space. Toilets and sinks have been set.  Plastic placed under the house and secured to the foundation walls (non-ventilated foundation).  The old container floors have been sanded and urethene is being painted on this week.  As best I can tell, the floors are mahoghany plywood and have finished up nicely.  The kitchen is complete except for the gas range hich I am waiting to find on sale. We have received our final inspection and are waiting for the certificate of occupancy to arrive in the mail.  I plan to begin moving in next week (God willing and the creek don't rise).    This is about it unless someone has questions. john@marmacwire.com.

Bidet and toilet (both salvaged). Floor and toilet surrond marble.  I was shocked to find after purchsing the marble that it was "made in China".  Too late to take it back.

Mahogony Plywood Floors (gouges from freight being dragged out)

Salvage cabinets and sink from Habitat for Humanity ReStore. Dishwasher salavaged from relative's remodle.  Range hood new.  Countertops new from Lowe's delaminated during installation and got full credit.

- Hello, My amazing Build Shipping Container House blog readers. Nice to meet You again, today. Here, now. In this article titled, , you might find interesting information about what You looking for. Hopefully, the content from my Container Homes article will bring you many advantages both in work and in life. Enjoy Your readings. ^_^

Title : Container House: Coming To The End - Angela's Blog
URL Link : Container House: Coming To The End - Angela's Blog

11/25/10 Thanksgiving Day!  While not much has changed as far as a picture could show, lots of work has been going on.  The HVAC unit has been installed.  Insulation has been blown in the attic space. Toilets and sinks have been set.  Plastic placed under the house and secured to the foundation walls (non-ventilated foundation).  The old container floors have been sanded and urethene is being painted on this week.  As best I can tell, the floors are mahoghany plywood and have finished up nicely.  The kitchen is complete except for the gas range hich I am waiting to find on sale. We have received our final inspection and are waiting for the certificate of occupancy to arrive in the mail.  I plan to begin moving in next week (God willing and the creek don't rise).    This is about it unless someone has questions. john@marmacwire.com.

Bidet and toilet (both salvaged). Floor and toilet surrond marble.  I was shocked to find after purchsing the marble that it was "made in China".  Too late to take it back.

Mahogony Plywood Floors (gouges from freight being dragged out)

Salvage cabinets and sink from Habitat for Humanity ReStore. Dishwasher salavaged from relative's remodle.  Range hood new.  Countertops new from Lowe's delaminated during installation and got full credit.

Read More

Container House: Wainscoting and Sheetrock - Angela's Blog

9/23/10 Waincoting is from wood we had sawed roughly ten years ago.  It was from 125 year old, 125' tall pines.  It has been air drying since then.  We sawed it to length, planed it, and grooved each edge to provide for overlap.  My brother Thomas helped me do the planing and my wife Mary Jane helped me install it.  Smith Drywall is doing the sheetrock installation.  Smith has found the sheetrocking to be a little more difficult due to issues of extra height and it being a converted shipping container.  We still have to finish the ceilings of the porches, blow the isulation on top of the containers (1' in addition to the 4" inside), HVAC installation, floor sanding, install cabinets and kitchen, marble on bathroom floor, doors and trim inside, and probably more than I have thought of.

- Hello, My amazing Build Shipping Container House blog readers. Nice to meet You again, today. Here, now. In this article titled, , you might find interesting information about what You looking for. Hopefully, the content from my Sheetrock Hung article Wainscoting Installed article will bring you many advantages both in work and in life. Enjoy Your readings. ^_^

Title : Container House: Wainscoting and Sheetrock - Angela's Blog
URL Link : Container House: Wainscoting and Sheetrock - Angela's Blog

9/23/10 Waincoting is from wood we had sawed roughly ten years ago.  It was from 125 year old, 125' tall pines.  It has been air drying since then.  We sawed it to length, planed it, and grooved each edge to provide for overlap.  My brother Thomas helped me do the planing and my wife Mary Jane helped me install it.  Smith Drywall is doing the sheetrock installation.  Smith has found the sheetrocking to be a little more difficult due to issues of extra height and it being a converted shipping container.  We still have to finish the ceilings of the porches, blow the isulation on top of the containers (1' in addition to the 4" inside), HVAC installation, floor sanding, install cabinets and kitchen, marble on bathroom floor, doors and trim inside, and probably more than I have thought of.

Read More

Container House: Moving Forward Again !! - Angela's Blog

9/23/10 It has been a while since I last posted.  We seemed to be stalled and there was really nothing to post.  Electrical and plumbing work is done mostly in the walls and under the floor and does not make for great pictures.  The tankless/instant water heater has been installed along with the propane tank.  I was adamant that we not pierce the roof of the containers any more than necessary, so we used through-the-wall, house-trailer bathroom vents.   Now that the wiring and pipes are in, the insulation and sheet rock could go up.  Progress is more visible as you can see in the pictures.  We continue to comply with Chesterfield County building codes and meet our regular inspections.  We hope to have a final inspection before the start date anniversary. 

- Hello, My amazing Build Shipping Container House blog readers. Nice to meet You again, today. Here, now. In this article titled, , you might find interesting information about what You looking for. Hopefully, the content from my Clint Installing Insulation article Johnny Foaming Window article will bring you many advantages both in work and in life. Enjoy Your readings. ^_^

Title : Container House: Moving Forward Again !! - Angela's Blog
URL Link : Container House: Moving Forward Again !! - Angela's Blog

9/23/10 It has been a while since I last posted.  We seemed to be stalled and there was really nothing to post.  Electrical and plumbing work is done mostly in the walls and under the floor and does not make for great pictures.  The tankless/instant water heater has been installed along with the propane tank.  I was adamant that we not pierce the roof of the containers any more than necessary, so we used through-the-wall, house-trailer bathroom vents.   Now that the wiring and pipes are in, the insulation and sheet rock could go up.  Progress is more visible as you can see in the pictures.  We continue to comply with Chesterfield County building codes and meet our regular inspections.  We hope to have a final inspection before the start date anniversary. 

Read More

Container House: Roof and Gable Coverings In Place - Angela's Blog

The metal roof is now in place.  This view shows the covered entry.  The space for the covered entry was made available due to extending one container eight feet beyond the other two.  This placement makes for a more interesting layout but increased the cost of the foundation and the truss placement.  There are a number of things I learned that have increased the cost that could be avoided in the future to reduce cost.  I will attempt to make a list of those items in a later post.

This view shows the opposite end of the house.  To the left is an open space under roof to be used as a carport.  Beyond this space is the screened porch.  To the right of the open space and to the left of the center container is a small private porch which is accessed from the master bedroom.    I do not plan to put any additional covering on the outside of the house.  It will be painted a consistent color to blend it all together. 

- Hello, My amazing Build Shipping Container House blog readers. Nice to meet You again, today. Here, now. In this article titled, , you might find interesting information about what You looking for. Hopefully, the content from my and Carport article Entry article Roof article will bring you many advantages both in work and in life. Enjoy Your readings. ^_^

Title : Container House: Roof and Gable Coverings In Place - Angela's Blog
URL Link : Container House: Roof and Gable Coverings In Place - Angela's Blog

The metal roof is now in place.  This view shows the covered entry.  The space for the covered entry was made available due to extending one container eight feet beyond the other two.  This placement makes for a more interesting layout but increased the cost of the foundation and the truss placement.  There are a number of things I learned that have increased the cost that could be avoided in the future to reduce cost.  I will attempt to make a list of those items in a later post.

This view shows the opposite end of the house.  To the left is an open space under roof to be used as a carport.  Beyond this space is the screened porch.  To the right of the open space and to the left of the center container is a small private porch which is accessed from the master bedroom.    I do not plan to put any additional covering on the outside of the house.  It will be painted a consistent color to blend it all together. 

Read More

Container House: Change Of Plans - Angela's Blog

If you noticed that there was no plan for roof trusses in the original drawings, you have just seen evidence of the unstable process of building an unconventional building.  I had originally planned to use salvaged material intended for the walls of a metal quanset hut to form the porch roof.  It would have been so expensive to get it engineered to comply with code, that we made the decision to go with a conventional roofing system using new material.  The roof covering will be Galvalume 5V metal (tin), attched with screws.

- Hello, My amazing Build Shipping Container House blog readers. Nice to meet You again, today. Here, now. In this article titled, , you might find interesting information about what You looking for. Hopefully, the content from my Roof plan article will bring you many advantages both in work and in life. Enjoy Your readings. ^_^

Title : Container House: Change Of Plans - Angela's Blog
URL Link : Container House: Change Of Plans - Angela's Blog

If you noticed that there was no plan for roof trusses in the original drawings, you have just seen evidence of the unstable process of building an unconventional building.  I had originally planned to use salvaged material intended for the walls of a metal quanset hut to form the porch roof.  It would have been so expensive to get it engineered to comply with code, that we made the decision to go with a conventional roofing system using new material.  The roof covering will be Galvalume 5V metal (tin), attched with screws.

Read More

Container House: Roof Trusses - Angela's Blog

The prefabricated roof trusses took very little time to install.  Mac Pfifer is the framing contractor and with his crew and the help of a boom truck, placed all trusses in one morning.  It took them the rest of the day and the following morning to tie it all down and tie it all together.  This view shows the vaulted ceiling shape of the screened porch.  The space from which the picture is taken will be the carport.

There is no real front or back to the house.  There is a primary entry on one corner, but the screened porch is designed to be a living area and is contiguous to the kitchen, dining area, and den.  The roof extends over the entry porch.  We plan to leave the container doors in place (second container to the right), to be closed for security when the house is locked.  When not in use, the container doors will be opened against the adjacent containers.  Storm/security shutters may be installed over the windows using the cutouts from the window holes.  This may happen later depending on money and schedule. 

- Hello, My amazing Build Shipping Container House blog readers. Nice to meet You again, today. Here, now. In this article titled, , you might find interesting information about what You looking for. Hopefully, the content from my Screened porch and entry corner article will bring you many advantages both in work and in life. Enjoy Your readings. ^_^

Title : Container House: Roof Trusses - Angela's Blog
URL Link : Container House: Roof Trusses - Angela's Blog

The prefabricated roof trusses took very little time to install.  Mac Pfifer is the framing contractor and with his crew and the help of a boom truck, placed all trusses in one morning.  It took them the rest of the day and the following morning to tie it all down and tie it all together.  This view shows the vaulted ceiling shape of the screened porch.  The space from which the picture is taken will be the carport.

There is no real front or back to the house.  There is a primary entry on one corner, but the screened porch is designed to be a living area and is contiguous to the kitchen, dining area, and den.  The roof extends over the entry porch.  We plan to leave the container doors in place (second container to the right), to be closed for security when the house is locked.  When not in use, the container doors will be opened against the adjacent containers.  Storm/security shutters may be installed over the windows using the cutouts from the window holes.  This may happen later depending on money and schedule. 

Read More